Win To Usb Code Driver Came With#
Win To Usb Code Driver Version Must#
Win To Usb Code Code 10 Error#

Win To Usb Code Code 10 Error

Win To Usb Code Driver Came With

If no driver came with your adapter, then you can try downloading one of the many drivers available on our website at First, you need to either get the disc that came with the adapter. This is normally due to an incorrect driver being installed. The license type defines whether a.ItвЂ™s common to see a code 10 error. Advantages of HASPThis container container can be placed on a PC or on a DM-KEY (USB dongle) depending on your selections during activation.

Win To Usb Code Driver Version Must

Activation of the program brings some disadvantages, such as that the program can be activated only on the allowed number of computers and the activation is always time-limited (up to 1 year) and needs to be repeatedly renewed. No activation of the software (e.g., HYDRUS) is needed. Unplug the USB-To-Serial adapter and run the PL2303 Code 10 Fix again, following the directions precisely until you get it right. If not, then the correct driver is not installed. The Driver Version must say 3.3.2.102 dated 09/24/08.

Easier and safer installation of aВ network version. The program (e.g., HYDRUS) can be used on multiple computers (e.g., desktop and laptop) only by transferring aВ small USB key. The hardware key (dongle) gives users assurance that the program can be easily installed and used, for example, on aВ new computer.

You will be informed about this fact in advance by our customer support and then you can follow point B. However, under certain circumstances, you can receive HASP which requires aВ one-time activation. Then it is necessary to install HYDRUS according to point AВ below. The use of HASP eliminates these problems.When purchasing aВ new HYDRUS license with HASP, the customer usually receives aВ fully functional HASP by post.

We recommend to install Hydrus before installing HASP (i.e. Option AВ - Fully functional HASP Then it is necessary to activate aВ new license in your HASP only once, according to point C.

Follow the instructions provided by SetUp. Once you double-click on it, it will automatically unpack into aВ temporary directory and start running Setup. The HYDRUS installation program is aВ self-extracting file, created in InstallShield (e.g., Hydrus3D_.exe). You can find all installation programs on the page 'Downloads'. Login into ELIS and download the latest HYDRUS installation program.

At the end of the installation process, check the 'Launch HYDRUS' check box, which will start HYDRUS. In the same dialog, check the box 'Install hardware-key driver'. Remember that HYDRUS projects should be located in aВ directory that is fully accessible for reading/writing/deleting of files.

Insert the HASP key into the USB port of this computer. During installation, it is necessary to check the box 'Install hardware-key driver'. Install HYDRUS 2.x on your computer according to instructions listed above. PC-Progress will then send you by e-mail aВ special file *.v2c (e.g., AcivateHasp.v2c) containing specific information for your key. When receiving the hardware key (dongle), please e-mail the customer support ( and confirm receipt of the shipment. Make sure that the authorization program works properly.Option B - HASP requiring aВ one-time activation

In the open window 'Sentinel Admin Control Center' (1) select the item 'Update/Attach', (2) choose the file *.v2c received from PC-Progress (e.g., UpdateHasp.v2c), and (3) click the button 'Apply File'.When using aВ network HASP, it is necessary to open relevant ports in Windows Firewall so that HYDRUS can communicate with the HASP key located on another computer on the LAN. Save this file and send it together with the license number to the customer support ( Please wait for receiving V2C file containing your new license configuration from the customer support Open the dialog window 'HYDRUS Authorization Status', select 'Authorization Method = Hardware Key' and click the button 'Apply V2C File'. Open the dialog window 'HYDRUS Authorization Status', select 'Authorization Method = Hardware Key' and click the button 'Remote Update: Create Customer To Vendor (C2V)File'. Make sure that the authorization of the program works properly.Option C - Upgrading your HYDRUS license with HASP This should complete aВ one-time HASP activation. In the open window 'Sentinel Admin Control Center' (1) select an item 'Update/Attach', (2) choose the file *.v2c received from PC-Progress (e.g., AcivateHasp.v2c), and (3) click the button 'Apply File'.

The solution is to reinstall the HASP driver from HYDRUS. The computer then cannot connect with the network key and authorization does not work. However, when aВ customer inserts HASP into his/her computer before installing HYDRUS, Windows can install the HASP driver automatically, without setting the Firewall parameters.

Win To Usb License Code